TWIN Model Description:

My personal favorite, its loose and free with speed to burn; effortless performance. Three models will be available, classic, lower rocker, wider & thicker with full rails, and performance swallow or round pin 5’6,5’8,5’10,6’0,6’3,6’5,6’8,7’0,7’6,8’0 etc.

Featured Board:
5’10 x 19" x 2-1/4, Nose 12-1/2", Tail 15-1/2",Tail Block 5-1/2" Tail – Swallow

Model Dimensions
• 5’6” x 18 1/2 x 2 1/8

• 5’8” x 18 3/4 x 2 1/8

• 5’10” x 19 x 2 1/4

• 6’0” x 19 1/4 x 2 3/8

• 6’2” x 19 1/2 x 2 1/2

• 6’4” x 19 3/4 x 2 5/8

TWIN PIN Model Description:

Twin pin-this design is a collaborated effort with Rasta to find stability and pivot at high speeds obtained on faster waves like pointbreaks, Indo, Fiji, and Tahiti. The elimination of surface area and width plus added tail rocker allowed this design to be responsive at higher speeds with more size and power.

Featured Board:
5’10 x 18 3/4 x 2 Nose 12 1/4

Tail 15 1/4

Tail – Round Pin

• 5’8” x 18 1/2 x 2 1/8

• 5’10 x 18 3/4 x 2 1/4

• 6’0” x 19 x 2 3/8

• 6’2” x 19 1/4 x 2 1/2

• 6’4” 19 1/2 x 2 5/8

PRO C-1 Model Description:

The most commonly ridden design on the ASP tour and in modern progressive surfing.
A subtle single concave, which creates lift, flowing into a double concave, which creates release transitioning to vee off the tail, which offers control. All these elements combine for performance, versatility, and forgiveness.
Average tour dimensions 6’0”x 18 1/4”x 2 1/4” , Design can be built up to 7’6”

Featured Board:

6’0 X 18 1/2 X 2 Nose 11-1/2" Tail 14”, Tail Block 5”
Tail -squash
Fin Set Up - Thruster

Model Dimensions

• 5’6” x 17 3/4 x 2 1/8
• 5’8” x 18 x 2 1/8
• 5’10” x 18 1/4 x 2 1/4
• 6’0” x 18 1/2 x 2 1/4
• 6’2” x 18 3/4 x 2 3/8
• 6’4” x 19 x 2-1/2"

YODA Model Description:

A small wave performance design. All the same design elements as the pro c-1, adding a little width and curve creates lift and glide for responsive small wave versatility. Designed to be ridden same as height of surfer or 2-4" less than normal shortboard. Average dimensions 5’10”x 18 3/4”x 2 1/4” built from 5’6 to 7’6”

Featured Board:
5’10 x 18 3/4 x 2 Nose 12 Tail 14-1/4"
Tail block 5 1/4
Tail- Swallow or Squash
Fin Set Up - Thruster

Model Dimensions
• 5’6” x 18 1/4 x 2 1/8
• 5’8” x 18 1/2 x 2 1/8
• 5’10” x 18 3/4 x 2 1/4
• 6’0” x 19 x 2 3/8
• 6’2” x 19 1/4 x 2 3/8
• 6’4” x 19 1/2 x 2 1/2

TURBO Model Description:

This design is a short board that can be pushed to more size and speed. A happy medium between riding something short that will hold in size, power and speed. With added pivot due to elimination of center, hip, tail area and increase in tail rocker. For waves that are fast,steep and instant pivot response time is needed.

Featured Board:

6’0 X 18 3/8 X 2-1/4" Nose 11-1/4”, Tail 13-3/4"

Tail- thumb or swallow
Fin Set Up - Thruster

Model Dimensions
• 5’6” X 17-5/8" X 2 1/8”
• 5’8” X 17-7/8" X 2 1/8
• 5’10” X 18 1/8 X 2 1/4
• 6’0” X 18 3/8 X 2 1/4
• 6’2” X 18 5/8 X 2 3/8
• 6’4” X 18-7/8" X 2 1/2

IRIE Model Description:

A short fun design to relax with effortless glide, without loss of performance.  Responsive and versatile for points and beach breaks. Originally designed with Kamalei Alexander in March 2002 for Kirra, Burleigh and Snapper’s point breaks. Designed to be ridden 2-4” shorter than surfer.

Featured Board:

5’10 X 20 X 2 3/8, Nose 14-1/4", Tail 14-1/2"

Tail - Round Pin
Fin Set Up - designed as a Thruster can be set up for Quad

Model Dimensions

From 5’2 to 6’8

• 5’4” x 19 1/4 x 2 1/8
• 5’6” x 19 1/2 x 2 1/4
• 5’8” x 19 3/4 x 2 3/8
• 5’10” x 20 x 2 3/8
• 6’0” x 20 1/4 x 2 1/2
• 6’2” x 20 1/2 x 2 5/8
• 6’4” x 20 3/4 x 2 5/8

MARS Model Description:

Massive.Air.Responsive.Speed.

This shortboard design combines a few different elements to bring together a high performance funboard. for tight arcs in small transitions with pivot,glide, and speed to punt. easy launch with performance to hit any lip.designed to be ridden 4” shorter than surfer

Featured Board:

5’4 x 19

Tail - Swallow, Thruster or Quad.

Fin Set Up - Thurster

FISH F-2 Model Description:

A fun, fast, and free design. If the waves are slow and flat generating speed will be effortless. The lower rocker and width, creates lift and speed with responsive performance.5’6 to 7’0. Each fish is specifically designed with fin placement in mind. Our goal is maximum performance for each design.

Featured Board:

5’10” X 20 X 2-1/4, Nose 14 1/2
Tail 15 3/4
Tail Block 7
Tail - Swallow 3”1/2 Deep
Fin Set Up - Twin

Model Dimensions

• 5’4” x 19 1/4 x 2 1/8
• 5’6” x 19 1/2 x 2 1/8
• 5’8” x 19 3/4 x 2 1/4
• 5’10” x 20 x 2 1/4
• 6’0” x 20 1/4 x 2 3/8
• 6’2” x 20 1/2 x 2 1/2
• 6’4” x 20 3/4 x 2 5/8

FISH F-3 Model Description:

A fun, fast, and free design. If the waves are slow and flat generating speed will be effortless. The lower rocker and width, creates lift and speed with responsive performance.5’6 to 7’0.

Featured Board:

5’10 X 19 1/4 X 2 1/4
Nose 13
Tail 15
Tail Block 6
Tail – Swallow 1 1/2 Deep
Fin Set Up - Thruster

Model Dimensions

• 5’4” x 18 1/2 x 2 1/8
• 5’6” x 18 3/4 x 2 1/8
• 5’8” x 19 x 2 1/4
• 5’10” x 19 1/4 x 2 1/4
• 6’0” x 19 1/2 x 2 3/8
• 6’2” x 19 3/4 x 2 1/2
• 6’4” x 20 x 2 5/8

FISH F-4 Model Description:

New models - Fish Wing 2,3,4  We will introduce a FW-2, FW-3, and FW-4. the Fish Wing series is designed with a wing for a breaking point in the outline which helps for direction changes, pivot and release due to the elimination of width and surface space behind wings. Both fish series are evolved, designed, and built around two different shortboard templates. Fish Wing series is evolved from a twin template, and fish series is evolved from a shortboard template

Featured Board:

5’10 X 19 1/2 X 2 1/4
Nose 13 1/2
Tail 15 1/2
Tail Block 6 1/2
Tail – Swallow 2 1/2 Deep
Fin Set Up - Quad

Model Dimensions

• 5’4” x 18 3/4 x 2 1/8
• 5’6” x 19 x 2 1/8
• 5’8” x 19 1/4 x 2 1/4
• 5’10” x 19 1/2 x 2 1/4
• 6’0” x 19 3/4 x 2 3/8
• 6’2” x 20 x 2 1/2
• 6’4” x 20 1/4 x 2 5/8

FISH FW-2 Model Description:

We will introduce a FW-2, FW-3, and FW-4. the Fish Wing series is designed with a wing for a breaking point in the outline which helps for direction changes, pivot and release due to the elimination of width and surface space behind wings.both fish series are evolved,designed,and built around two different shortboard templates.fish wing series is evolved from a twin template,and fish series is evolved from a shortboard template

FISH FW-3 Model:

STING Model Description:

An Aipa family tradition. Offered in a retro and nano models. Our oldest most popular design. Back to the future, an Aipa original.

Featured Board:

5’10 X 19 1/4 X 2 3/8 Nose 13 1/4
Tail 14
Tail Block 5 1/2
Tail - Swallow
Fin Set Up - Single Fin W/box, Or Thruster

Model Dimensions

• 5’6” x 18 3/4 x 2 1/8
• 5’8” x 19 x 2 1/4
• 5’10” x 19 1/4 x 2 3/8
• 6’0” x 19 1/2 x 2 3/ 8
• 6’2” x 19 3/4 x 2 1/2
• 6’4” x 20 x 2 5/8

STING Pin Model Description:

Once again eliminating surface area in hips and tail equates to less planning area and more pivot with a quicker response at higher speeds.

Featured Board:

Designed @ 5’10” x 18 3/4 x 2 3/8
Nose 12 1/2
Tail 13 3/4
Tail- Round Pin
Fin Set up - Single Fin w/Box or Thruster

Model Dimensions

• 5’6” x 18 1/4 x 2 1/8
• 5’8” x 18-1/2 x 2 1/4
• 5’10” x 18-3/4 x 2 3/8
• 6’0” x 19 x 2 3/ 8
• 6’2” x 19 1/4 x 2 1/2
• 6’4” x 19-1/2 x 2 5/8

SIGNATURE SERIES

Buttons Retro 75-76 sting quiver, Buttons Nano 2010 sting quiver, Rasta, Jun Jo, Ross Williams.

SPECIALTY BOARDS

Aloha Series, Surfers for Cetaceans, Peter Miller Foundation.

RASTA 08’ NORTH SHORE QUIVER

Model Dimensions
• 5’8” X 19 1/4 X 2 3/8 Round Pin
• 5’10” X 18 3/4 X 2 3/8 Round Pin
• 5’10” X 19 X 2 3/8 Swallow
• 6’0” X 18 3/4 X 2 3/8 Swallow
• 6’3” 18 3/4 X 2 3/8 Swallow
• 6’5” X 18 3/4 X 2 3/8 Swallow
• 6’8” X 18 3/4 X 2 3/8 Swallow
• 7’0” X 18 3/4 X 2 3/8 Swallow
• 7’6” X 19 X 2 1/2 Swallow
• 8’0” X 19 1/2 X 2 3/4 Swallow
• 6’1” X 18 3/4 X 2 3/8 Round Pin
• 6’6” X 18 3/4 X 2 3/8 Round Pin
• 7’1” X 18 3/4 X 2 3/8 Round Pin